Forum Romania Inedit
Romania Inedit - Resursa ta de Fun
|
Lista Forumurilor Pe Tematici
|
Forum Romania Inedit | Reguli | Inregistrare | Login
POZE FORUM ROMANIA INEDIT
Nu sunteti logat.
|
Nou pe simpatie:
Popa Bianca la Simpatie.ro
 | Femeie
24 ani
Valcea
cauta Barbat
25 - 63 ani |
|
|
spartan
Pe lista neagra
Inregistrat: acum 17 ani
|
|
Scheme pentru boxe, subwoofere, interesant pentru cei care sunt pasionati
Building instructions
As can be seen from the drawing, the EXPERIENCE V 20 cabinet consists of straight-edged butt-jointed boards glued together. The inside of the speaker contains a medium range cabinet and three reinforcing boards. The reinforcing boards marked in the drawing with a "1" have three cut-outs each and serve at the same time as the tops and bases for the mid-range chamber. The board marked with a "2" has four cut-outs and is the lower reinforcement. The reinforcing boards have the same function as the cross-laths used in some other sample constructions, i.e. to stiffen parallel panels. Three holes are required of 8 mm diameter in the rear panel of the medium range chamber for the cables, as can be seen in the front view of the cabinet drawing through the cut-out for the lower mid-range driver. The two 73 mm cut-outs in the front baffle are for mounting the tubes, and the terminals are mounted in the square cut-out in the rear panel. The circuit board for the crossover unit is attached to the panel behind the lower bass cut-out.
Inner damping
One mat of damping material is used in the mid-range chamber, and the remaining mats are rolled or folded and placed inside the cabinet in such a way that only the area directly behind the two tubes is free. In order to prevent the mats slipping later, they should be clamped in the cut-outs of the reinforcing boards.
Component parts list for 1 box
Tweeter: G 25 FFL 8 Ohm 1 piece
Midrange driver: W 130 S 8 Ohm 2 pieces
Woofer: W 200 S 8 Ohm 2 pieces
Crossover: "Experience V 20"
Bass reflex tube: BR 15.34 (full length) 2 pieces
Terminal: BT 95/75 1 piece
Damping material: 6 bags
Wood screws: 3,5 x 25 mm 28 pieces
Cable: 2 x 1,5 mm2 3 m
2 x 2,5 mm2 2,5 m
................
Cabinet parts list for 1 box
Parts Size (mm) Quantity
Material: 19 mm chipboard or MDF
Top and bottom panel 322 x 262 2
Side panel 322 x 1300 2
Front and rear panel 300 x 1300 2
Brace 322 x 262 3
Midrange rear panel 400 x 143 1
Midrange side panel 400 x 119 1
|
|
| pus acum 17 ani |
|